Strong magnets should have good anti-corrosion performance

    The anti-corrosion performance has received widespread attention in many industries, and it is naturally very important in the production industry because strong magnets are prone to erosion. Therefore, the vast majority of strong magnet products must be electroplated or painted. The surface solutions of the strong magnet products include electroplating process nickel, Hot-dip galvanization, pet film, electrophoresis principle, etc. If the finished product of a powerful magnet works in a fully enclosed geographical environment, acid pickling and phosphating are also required.
    Due to the high magnetism and easy to use performance of powerful magnets, their price is not very high, and their application range has rapidly expanded. Compared with other permanent ferrite materials such as ferrite, powerful magnets have excellent magnetic properties. The electric energy products of powerful magnets are much higher than other types of magnets and have a very high saturation magnetic energy product. The powerful magnet products produced by Dongyang Neodymium Iron Boron Magnetic Steel Factory are widely used in packaging, gadgets, gifts and handicrafts, fitness and sports magnetic control vehicles, motors, micro motors, computers, experimental instruments, instrument panels, handheld scooters, digital cameras, clocks, sounds, household electrical products, collaborative office systems, far-infrared magnetic therapy, and daily life.
    In damp and poorly ventilated areas; When the temperature difference changes greatly, even if the strong magnet that passes the salt spray test is stored in a harsh environment for a long time, it is likely to cause rust spots. When electroplating products are stored in a harsh geographical environment, the Subcutaneous tissue is further reflected in the condensate, which will reduce the fusion of Subcutaneous tissue and the coating. More serious cases will continue to cause some walls or materials to delaminate again, and then natural peeling. The strong magnets of electroplating products should not be placed in areas with high altitude and relative humidity for a long time, but should be placed in a cool and dry area.