There is no uniform and fixed shape of a strong magnet before it is made, and even when it becomes a magnet, it is not magnetic because the material of the magnet is not magnetic. For the shape of a strong magnet, the shape of a strong magnet can only be produced after artificial synthesis. In order to better protect the mechanical equipment of square strong magnets and the finished products of isophase magnets, two points should be paid attention to.
1. Working environment
First of all, when using NdFeB magnets, you must pay attention to ensure that the environment around the magnet is very good. Now powerful magnets still have great development potential in the market and are widely used. The most important thing to pay attention to when working with magnets is neatness and cleanliness. Because powerful magnets cannot work properly in places with relatively poor environments. Because it is not very good at adsorbing iron filings or tiny particles, if the working environment is poor, the magnet will easily lose its magnetism, ultimately shortening its service life. Therefore, keeping the working environment clean is very important. The most important requirement for magnets.
2. Indoor environment
This is another important point. Under normal circumstances, when storing powerful magnets, you must pay attention to the indoor environment to ensure smooth indoor air flow, and you cannot choose a humid place for storage. You must choose a dry environment. NdFeB magnets not only have requirements for the working environment, but also for the indoor environment. Its indoor ambient temperature cannot exceed the working temperature of the magnet. Products that have not been electroplated can be appropriately oiled to prevent rust. Be sure to separate sensitive magnets when storing magnets. And the storage environment must comply with standards.