AlNiCo permanent magnets are made of an alloy consisting mainly of iron, aluminum, nickel and cobalt, but may contain small amounts of other elements (such as copper and titanium). AlNiCo brands vary with cobalt content, ranging from 0 (AlNiCo 3) to 40% (AlNiCo 8). The lower aluminum-nickel-cobalt grades (2, 3, and 4) are undirected magnet grades whose magnetic properties are homogeneous and equal in all directions.
AlNiCo Magnet Pot measures are an essential aspect of maintaining safety and efficiency in industrial environments. As we know, AlNiCo magnets are made of aluminum, nickel, and cobalt, which are excellent materials for producing strong and durable magnets.
These models have a relatively low magnetic output. Anisotropic grades (AlNiCo 5, 6, 8, and 9) are designed to produce a high magnetic output in a specified direction. Orientation can be achieved during heat treatment by cooling the product at a temperature of approximately 2000°F (1093°C) at a controlled rate in a magnetic field conforming to the preferred direction of magnetization. AlNiCo magnet pot has the advantages of high remanence (up to 1.35T), low coercivity (usually less than 160kA/m) and nonlinear demagnetization curve, so AlNiCo magnet is easy to be magnetized, but also easy to demagnetize. Special attention should be paid to its particularity in the design and manufacture of magnetic circuit of devices, and the magnet must be stabilized in advance. AlNiCo permanent magnet material has low mechanical strength, high hardness, crisp quality and poor machinability, so it can not be designed as structural parts. It can only carry out a small amount of grinding or electric discharge machining during processing, and can not use forging and other mechanical processing.
AlNiCo magnet pot is magnet encased in a steel shell, shaped like a pot. Through the magnetic circuit design, the steel shell will increase its tension.AlNiCo magnet pot mainly has these types: sink pot magnetic, through hole pot magnetic, internal thread pot magnetic, pot magnet center with screw hole.AlNiCo magnet pot is often used in magnetic hooks, door cloggers, traction lights and magnetic fixtures.
Yanhe Magtech® is familiar with information of magnet industry in China. We have long-term strategic cooperative relations with the other six factories. Two are for sintered NdFeB, two are for Hard Ferrite, and two are for AlNiCo and SmCo. Therefore, Yanhe Magtech® can provide accurate information and the first-class high-quality products with the most competitive price for our customers.
Yanhe Magtech® has passed the authentication of ISO 9001:2015, and has covered Product-liability insurance. We eliminate the customers’worries completely. With the reliable quality, our products are exported to Europe, the United States and Asia, etc.
Yanhe Magtech ® aim: To provide more extensive information, products, technology design and service for customers. To make customers satisfied in the course of commercial activity.
Hot Tags: alnico magnet pot, China alnico magnet pot suppliers, manufacturers, Magnetic Water Filter, Wet Pre concentration PM Separator, FeCrCo Magnet, AlNiCo Block Magnet, Rubber Magnet Roll, Magnetic Lifter